American Data Supply
carries the complete line of fusion splicers from AFL and other manufacturers including the new line from Wilcom which offer
the most extensive and complete line of fusion splicers and related equipment
for field fusion splicing and factory/laboratory use. Our Fujikura fusion splicers
are the most widely used in the world, and known for their performance, productivity
and reliability. And all our fusion splicer splicing equipment is backed by our
Technical Support team. Designed to meet the needs of today's high fiber density
networks, the FSM-40R24 has the capability to splice ribbons as large as 24 fibers
as well as single fibers. Ultra compact and lightweight, this unit features a
built-in AC adapter and a dual axes optical path system to provide fully automatic,
low splice loss performance in less than 50 seconds for SM, MM, DS, and NZDS fiber
types. Individual splice loss is estimated for each splice, and 36 pre-programmed
splicing modes and five pre-programmed heater modes allow for specialized splicing
and various splice protector sleeve types.
The LP-900 is a core alignment fusion splicer designed for use within several areas of fiber optic deployment. Whether your application is Premise, OSP or FTTx, splicing with the LP-900 will get the job done right.
The LP-900 is a core alignment fusion splicer designed for use within several areas of fiber optic deployment. Whether your application is Premise, OSP or FTTx, splicing with the LP-900 will get the job done right.
Wilcom Now offers it's own line of quality fusion splicers at a costs saving over AFL's line of splicers- Call us today for a quote.
The PRO-730 Fustion Splicer is a core alignment fusion splicer designed for use within several areas of fiber optic deployment. Whether your application is Premise, OSP or FTTx, splicing with the PRO-730 will get the job done right.
The PRO-730 Fusion Splicer is designed to work with all the popular fiber types and in all weather conditions. The dual axis view and reversible color monitor with control panels on both sides assures splicer efficiency in any work environment. The PRO-730 is a core alignment fusion splicer designed for use within several areas of fiber optic deployment. Whether your application is Premise, OSP or FTTx, splicing with the PRO-730 will get the job done right. The PRO-730 is designed to work with all the popular fiber types and in all weather conditions. The dual axis view and reversible color monitor with control panels on both sides assures splicer efficiency in any work environment.
The SpliceMate (FSM-11) is the world’s smallest and most portable fusion splicer, designed to meet the challenges posed by today’s fiber networks. Fitting in the palm of your hand, the SpliceMate is smart and reliable enough to be used with confidence by inexperienced operators.SpliceMate’s advanced intelligence features include dual-camera fiber inspection to insure the splice is right, and auto arc calibration...an industry first. It’s easy to operate and quickly makes low loss splices with all common types of optical fibers up to 4-fiber ribbons. The SpliceMate is available with a variety of powering options including a battery pack and adapters to work with AC or DC power sources.
The SpliceMate D900 has a unique design that significantly improves installation and repair operations for any 900µm application. Ideally suited for tactical fiber optic cable assemblies' (TFOCA) repair needs, the D900 is the industry-standard for simultaneously splicing two 900µm optical fibers. Its user-friendly graphical interface and automated features make it suitable for those with limited splicing experience.
Features:Part Number
•
Highly portable
•
Dual camera inspection
•
3.5” dual direction monitor
•
Single or 4-fiber versions available
•
40 second tube heater
•
Auto arc calibration
•
30 mph wind protector
The SpliceMate (FSM-11) is the world’s
smallest and most portable fusion splicer, designed to meet
the challenges posed by today’s fiber networks. Fitting
in the palm of your hand, the SpliceMate is smart and reliable
enough to be used with confidence by inexperienced operators.
Setting
the standard is the Fujikura 60 and 18 series of core alignment
and fixed V-groove fusion splicers.
The
FSM-60S Fusion Splicer offers construction able
to resist shock, dust or moisture and it has a removable
sheath clamp for FuseConnect or other fiber holders. The
FSM-60S also has automatic arc calibration and fiber indentification,
an automatic tube heater, can withstand a 30" drop
and keep on splicing plus the case showed below actually
doubles as a workstation!
The
FuseConnect Fusion Spliced Field-Terminated SC Connector
gives factory quality termination with four components and
no need for polishing, crimping or adhesives.
The FSM-17S establishes a new standard for single fiber "fixed v-groove" type fusion splicers with a host of improvements including a 35 second tube heater, dual position monitor, and a longer battery life. The real time arc calibration feature makes field maintenance easier than ever. Also available now is a version of the FSM-17S utilizing a fiber holder system, making the splicing process extremely simple for inexperienced technicians. Both models quickly attach to the newly redesigned ASW-02 workstation making, field portability a breeze. With the introduction of the FSM-17S, AFL Fujikura Ltd. offers the most sophisticated and capable mini fusion splicer ever. The technology embodied in the FSM-17S provides unprecedented utility in harsh outdoor splicing environments. Both temperature and pressure compensation are provided in order to assure proper arc conditions in extreme environments. In addition, the wind protector assures a stable arc in cross winds in excess of 30mph. Ease of splicing is assured by the ergonomic design. A 5" color anti-reflective LCD monitor with an unmatched 110X fiber magnification ensures excellent visibility during splicing operations..
Features:
* 35 second tube heater
* Dual direction monitor position
* Long life battery (up to 160 splices/shrinks per charge)
* Automatic arc calibration
AFL 17 R Fusion Splicer
The FSM-17R establishes a new standard for up to 4-fiber “fixed v-groove” ribbon splicing. The unit includes a host of valuable features including fast performance, dual position monitor, and extremely long battery life. The real-time arc calibration feature makes field maintenance easier than ever. The FSM-17R is well-suited for FTTx applications, and quickly attaches to the ASW-02 workstation, making field portability a breeze in the most challenging of aerial or terrestrial splicing environments.
•
40 second tube heater
•
Dual direction monitor position
•
Long life battery (up to 140 splices/shrinks per charge)
•
Automatic arc calibration
AFl 17 S Fusion Splicer
The FSM-17S establishes a new standard for single fiber “fixed v-groove” type fusion splicers with a host of improvements including a 35 second tube heater, dual position monitor, and a longer battery life. The real time arc calibration feature makes field maintenance easier than ever. Also available now is a version of the FSM-17S utilizing a fiber holder system, making the splicing process extremely simple for inexperienced technicians. The FSM-17S is well suited for FTTX applications and both models quickly attach to the newly redesigned ASW-02 workstation making, field portability a breeze.
FUSION SPLICER KIT FOR 17S Fusion Splicer:Part No: S013616 : AFL FSM-17S Mini Fusion Splicer with built in heater. Comes with a CT-20-12 cleaver, FP-03 40mm/60mm Protection Sleeves 50 and a rugged carrying case.
With the introduction of the FSM-17S, AFL Fujikura Ltd. offers the most sophisticated and capable mini fusion splicer ever. The technology embodied in the FSM-17S provides unprecedented utility in harsh outdoor splicing environments. Both temperature and pressure compensation are provided in order to assure proper arc conditions in extreme environments. In addition, the wind protector assures a stable arc in cross winds in excess of 30mph. Ease of splicing is assured by the ergonomic design. A 5" color anti-reflective LCD monitor with an unmatched 110X fiber magnification ensures excellent visibility during splicing operations.
AFL 17 S Fusion Splicer Features:
•
35 second tube heater
•
Dual direction monitor position
•
Long life battery (up to 160 splices/shrinks per charge)
•
Automatic arc calibration
•
Available in either sheath clamp or fiber
holder models
Today’s research and factory splicing applications require a tremendous amount of flexibility. Fujikura’s FSM-45F splicer is designed with both of these applications in mind.The FSM-45F splicer is designed to handle dissimilar fiber combinations with ease and splices various types of fibers ranging from < 80µm to 400µm clad diameter fibers. The FSM-45F splicer features Fujikura’s patented Sweep™ arc technology to minimize splice loss between different combinations.Since the transition from research to production is so critical, this splicer has been designed to be compatible with AFL Telecommunications’ SpliceMaster and SpliceLab software packages, and a full set of LabVIEW® drivers, enabling a wide variety of additional functions, including splicing based upon test meter feedback (attenuation, polarization, etc.). Communication is through a USB interface.
AFL FSM 45 F Fusion Splicer Features:
•
Capable of splicing fibers from < 80µm to 400µm clad diameter
•
Short cleave length capability
•
Single clamp for 80-400 um
•
Ultra high strength splicing capability
•
Consistent splicing results with a wide variety of fiber types
•
150+ LabVIEW drivers
•
Compatibility with SpliceLab™ splicing management software provides great flexibility to control splicing parameters for laboratory-type splicing
•
Compability with SpliceMaster® splicing management software enables smooth transition from development to production
•
USB PC interface
50R12
Mass Fusion Splicer-Approved
Verizon Fusion Splicer
The FSM-50R12 is an
approved Verizon fusion splicer for the FTTH projects currently
underway and American Data Supply will GURANTEE the best
delivery and pricing for the AFL 50R12 Fusion Splicer. Please
call for stock availability- we can take a purchase order
and offer you a unit right off the assembly line if one
is 50R12 is not in stock. The FSM-50R12 fusion splicer offers
numerous improvements to increase productivity and provide
additional flexibility. A new "auto load" feature provides
for fast and easy placement of the fiber holders into the
splicer. The FSM-50R12 also benefits from a greatly improved
tube heater which shrinks a 12 fiber splice protection sleeve
in approximately 45 seconds. Other enhancements include
larger capacity batteries, dual direction monitor, and real
time arc calibration. The FSM-50R12 quickly attaches to
our newly redesigned ASW-02 workstation, making field portability
a breeze.
We Stock Many AFL Fusion Splicers - Call For Availability and Latest Pricing
Or Click On The Chat Button At The Top Of The Page To Talk To One Of Our Representatives
Features:
45 second tube heater
Dual direction monitor position
Long life batteries (up to 140 splices/shrinks per charge)
Automatic arc calibration
LOW PRICE GUARANTEE: American Data Supply will NOT BE UNDERSOLD. Just provide us with a written quote from any US competitor and American Data Supply will MEET or BEAT their price! Call Us For Additional Details At (866) 342-3721
American Data Supply
carries the complete line of AFL Telecommunications fusion splicers which offer
the most extensive and complete line of fusion splicers and related equipment
for field fusion splicing and factory/laboratory use. Our Fujikura fusion splicers
are the most widely used in the world, and known for their performance, productivity
and reliability. And all our fusion splicer splicing equipment is backed by our
Technical Support team. Designed to meet the needs of today's high fiber density
networks, the FSM-40R24 has the capability to splice ribbons as large as 24 fibers
as well as single fibers. Ultra compact and lightweight, this unit features a
built-in AC adapter and a dual axes optical path system to provide fully automatic,
low splice loss performance in less than 50 seconds for SM, MM, DS, and NZDS fiber
types. Individual splice loss is estimated for each splice, and 36 pre-programmed
splicing modes and five pre-programmed heater modes allow for specialized splicing
and various splice protector sleeve types. Memory also permits 30 user defined
splice mode settings and 10 splice protection sleeve heater settings, as well
as storage of downloadable splice data for 80 24-fiber splices or 320 single fiber splices. The large, color LCD screen displays all 24 fibers simultaneously in
alternate axe. To keep up with the development of DWDM optical communication devices,
we developed the FSM-40PM for splicing of PM fibers. The FSM-40PM splices dissimilar
fiber combinations, especially Erbium-doped fiber to single-mode fiber using patented
sweep arc functions in addition to excellent PM capabilities. Designed for accuracy
and increased productivity, the 40PM offers fully automatic splicing modes for
PANDA and 3M Tiger fibers.
AFL
Telecommunications offers the most extensive and complete line of fusion splicers
and related equipment for field splicing and factory/laboratory use. Our Fujikura
splicers are the most widely used in the world, and known for their performance,
productivity and reliability. And all our splicers are backed by our Technical
Support Team.
Fiber Cleavers
Fiber Cleavers
Fusion Splicers
Splice Protection
Fiber Strippers
Splicing Accessories
50S Fusion Splicer
50R12 Mass Fusion Splicer
17S Fusion Splicer
As the name implies, fusion splicers (see table, page 66) are instruments that make a fusion splice; that is, at the junction where two or more optical fibers are brought together, the fibers are melted together to form a single strand. Optical-fiber cables are joined in this way for any number of reasons: to shorten long cable runs, to economize in crowded conduits, and to meet fire code restrictions, to name a few. Fusion splicing generally uses an electric arc to soften the ends of the two glass fibers, at high temperature, while they are in contact with each other and are being pushed slightly together. When a fusion splice is properly made, the joint is virtually indistinguishable from an uncut fiber.
Using fixed V-groove alignment,
Sumitomo Electric Lightwave's Type-65 fusion splicer
can be used for all types of ribbon and single
splicing. The fiber viewing system lets you focus
on up to 12 fibers at a time with accuracy.
Sounds easy? There used to be several intangibles that you had to take into account when splicing two optical fibers together. During the primitive stages of modern fusion splicer development no more than eight years ago, a length of stripped fiber would curl a bit along its length when you placed it in a splicing V-groove. This inconvenience was called "fiber curl." Fiber curl adversely affected mass-fusion splice yield because it contributed to splicer offset. Offset causes core misalignment that results in higher splice losses. Offset can also be caused by contaminants such as dirt in the splicer V-grooves and particles or buffer remains on the bare glass.
You and your fusion splicer had to contend with the sun and wind since this is an outside plant (OSP) activity. At times, when using a V-groove to passively align the two fibers, you had to cope with various types of geometrical aberrations in the fibers themselves. Large diameter fibers rise up from the V-groove, while small fibers sink down. Cladding noncircularity, or "ovality" as it was sometimes called, also made it hard for you to align the fiber cores. The joint's loss will depend on the angular orientation of the oval fiber in the groove. Any noncircular fiber or offset diameter will affect the reliability of your splice.
Technical innovations have helped to erase these primitive concerns. Automation, compatible software, and one-step procedures have taken away the element of chance and the capacity for human error. Today's fusion splicers either use fixed V-groove or core alignment systems. "High-end" single-fiber splicers use the core alignment technology, while mass fusion splicers and "mini" (portable) splicers use fixed V-groove.
Fixed V-groove
The fixed V-groove splicer is an economical choice that depends upon quality fiber for high-quality results. When a fixed V-groove splicer is used to estimate splice loss, it operates by assuming that the cladding of the fibers-not the cores-is aligned. Manufacturers have improved fiber quality in recent years so this is not an issue anymore. George O'Mara, production manager, Sumitomo Electric Lighwave (www.sel-rtp.com), told how "fiber curl" is no longer a problem, even with ribbon fiber. "We are in a fortunate position to have some new technology to manage with the V-groove and to look at our ribbon closely to make sure it is what we need to do the splicing." Sumitomo's Type-65 Micro-Mass fusion splicer uses this fixed V-groove alignment system and features a 5.6-inch display to give you a clear fiber image even in direct sunlight.
AFL Fujikura Ltd.'s FSM-40S offering is ergonomic for difficult aerial taut-sheath projects and a 5-inch LCD monitor maintains visibility in the bright sunlight.
The fiber viewing system provides simultaneous focusing of up to 12 fibers at a time and maintains equal resolution across all fibers for improved accuracy of splice loss estimations. Also, the high-speed, high-resolution image processing system automatically evaluates the fibers in two planes (X and Y axis) for cleave end-face quality, cleave length irregularity, and fiber offset to screen out most likely causes in high-loss splices. With battery operation, wind protection, and a compact size, the Type-65 is designed for aerial and taut-sheath applications. This wind protective design lets you splice in winds of up to 30 mph.
Fitel Technologies' (www.fiteltech.com) S199S is an example of how you can splice in the field for longer periods of time without worrying about running out of power. On average, it takes a longer amount of time to splice using fixed V-groove technology as opposed to core-to-core alignment. The S199S has a battery capacity indicator that gives you an indication of how much longer you can operate in the field before you have to recharge. "A slide-in battery in the S199S as well as in Fitel's core-aligning S176 makes the fusion splicers more portable," says Darren Newman, service engineer at Fitel's technical center. Either an AC/DC converter or battery can be slotted in the main body of the S199S without wiring.
Corning Cable Systems' (www.corn ing.cablesystems.com) MiniMASS Series 5000 fixed V-groove fusion splicer offers an uninterruptible power supply. You can either operate on AC, DC, or battery power with the MiniMASS Series 5000. Once either source of power runs out, the other will automatically take its place. "If you are in the process of splicing and the AC power goes, it will not stop the process," explains Jeff Fullwood, product line specialist for splice equipment. "This makes sure there is no 'hiccup' in your performance." Also, a "snap-in" magnetic handler feature is designed for consistent placement into the V-groove. These handlers are made of a high-density polymer material. At the bottom side of the handler, there is a small metal plate. When you place the handler in the stage of the splicer, a magnet pulls the handler and the fiber into the groove. This feature lets you place the fibers to be spliced into the unit without having to physically touch the fibers and risk contamination.
Profile alignment system
A fusion splicer using a profile alignment system images fibers and measures the important geometrical parameters of each cable. By viewing the fibers from two perpendicular directions, the images are computer-processed and analyzed to determine cladding offset, core deformation, variation in fiber outer diameters, and other relevant parameters. These measurements are used in an algorithm to estimate a splice loss.
AFL Fujikura Ltd. (www.aflfiber.com) offers an FSM-40S fusion splicer that uses PAS core alignment technology. This type of splicer is designed to optimize the alignment of the fiber before splicing to get the lowest possible splice loss. The FSM-40S features a selectable image display that includes single- and dual-axis fiber viewing on a 5-inch LCD monitor. Instead of evaluating the fiber in two planes (X and Y axis), such as with fixed V-groove technology, PAS measures alignment on three planes (X, Y, and Z axis).
Corning Cable Systems' X77 lets you compensate for environmental changes and make operation adjustments in real-time.
This automated method of fusion splicing requires several moving parts to measure alignment on three planes, and generates a tremendous amount of heat. For this reason, the FSM-40S features automatic temperature and humidity compensation. It can withstand extreme environments and means you can create an accurate core-to-core splice in any OSP project.
"An internal pressure and temperature gauge continuously monitors the atmospheric surroundings around the splicer," explains Vitas Laniauskas, product specialist (OFSP), AFL Fujikura Ltd. "In certain situations, the gauge will alert the operator, or will make changes, or 'keep tabs' on changes when an arc calibration takes place." A feature that compensates for environmental conditions makes the FSM-40S a solution for aerial taut-sheath applications. Aerial taut-sheath splicing involves cross winds, and at times, harsh outdoor conditions. Also, the small footprint of the FSM-40S makes the unit portable, and it "won't get in your way" during aerial taut-sheath splicing, according to Laniauskas. This is useful since you work with a limited workspace for this application.
In addition to having a smaller footprint, core-to-core fusion splicers such as the FSM-40S have multiple pre-programmed modes for specialized splicing. Core-to-core fusion splicers are designed to fuse singlemode, multimode, non-zero dispersion-shifted (NZ-DS), dispersion-shifted (DS), cutoff-shifted (CS), and erbium-doped fiber. These different types of fiber will have different dimensions, as well as other individual characteristics such as fiber quality or age.
Local-injection detection alignment
Local-injection detection (LID) alignment is similar to PAS in that it fuses fibers core-to-core and has the ability to splice two fibers with dissimilar characteristics. This technology also aligns the X, Y, and Z axes for a precise splice. In LID alignment, the machine injects light into the core of one fiber and detects the amount of light in the other fiber.
Corning Cable Systems' Series 7000 X77 is an example of a fusion splicer that uses LID alignment. The unit injects a 1,300-nm light signal directly into the core of the fiber, moves the fibers in three axes for alignment purposes, and then monitors that light signal during fusion. An Automatic Fuse Time Control (AFC) feature in the X77 lets you monitor the LID levels in real-time. By actively monitoring the LID levels during fusion, you can compensate for varying environmental changes and splice wear.
Aurora Instruments (www.aurora-instruments.com) offers a Source port option for its FW312 fusion splicer that lets you work with bare or dark-color-coated fibers. This Source port directs the source current away from the standard LID injector to the source port. The feature allows automatic LID-optimized splicing of fibers with any coating or jacket, regardless of thickness or color.
PAS/LID combination
Aurora Instruments Inc. uses a combination of PAS and LID alignment systems in its Fusion 3500. Sub-pixel image processing in both X and Y axes simultaneously lets you get an alignment, slice, and splice loss estimate in addition to giving the operator a clear view of the operation.
When aligning fibers core-to-core, it is important to be able to monitor the splice and check for remaining particles or buffer remains. Data points are normally recognized as pixels on a monitor. Sub-pixel image processing lets you see between pixels. "Sub-pixel resolution is a software method that scans across an image and builds a function of light intensity versus pixel position and it can interpolate between the [data] points," says Larry Wesson, president, Aurora Instruments. This feature lets you view the geometrical parameters of the fibers from two perpendicular directions to use the PAS alignment method. In addition, the ability to measure light intensity complements the LID mode. The sub-pixel resolution will enhance your view of the light so that you may align the cores with improved accuracy.
Looking to the future
Fusion splicer manufacturers are moving towards units with a smaller footprint, more programmable features, automation, versatility, and ruggedness. Improvements in fiber manufacturing are reducing quality concerns, and technology finds new ways to help you.
Ryan Cliche is Assistant Editor for Cabling Installation & Maintenance.
LOW
PRICE GUARANTEE: American Data Supply will NOT
BE UNDERSOLD. Just provide us with a written quote from any US competitor
and American Data Supply will MEET or BEAT their price! Call Us For Additional Details At
(866) 342-3721
Were
here to help you solve your business challenges and increase your ability to meet
your own customers growing expectations from their telecommunications service
providers.